Skip to main content
Version: 1.8

FAQ

This FAQ is a work in progress designed to answer the questions our users most frequently ask about Rancher Desktop.

Q: Is Rancher Desktop a desktop version of Rancher?​

A: No. Rancher Desktop is not Rancher on the Desktop.

While Rancher and Rancher Desktop share the Rancher name, they do different things. But, the two solutions do complement each other:

Rancher is a complete software stack for managing multiple Kubernetes clusters across any infrastructure.

Rancher Desktop provides container management and a Kubernetes instance on the desktop to support local development use cases.

Q: Is there a Kubernetes Cluster Explorer available in Rancher Desktop?​

A: Yes, the Rancher Dashboard is included as a feature preview in the release 1.2.1. Invoke the dashboard by clicking on Dashboard option in the system tray menu.

Learn more about Rancher Desktop. Learn more about Rancher.

Q: Can I have Docker Desktop installed alongside Rancher Desktop?​

A: Yes, but they cannot be run at the same time as both Rancher Desktop and Docker Desktop use the same Docker socket (/var/run/docker.sock). Be sure to stop one before starting the other.

Q: How can I perform a clean uninstall of Rancher Desktop?​

A: First, perform a Factory Reset, and then uninstall the app. The uninstall process varies based on the operating system. For more information, please refer here.

Q: What support, if any, is available for DNS over VPN on Windows?​

A: An alternative DNS resolver for Windows has been implemented to address some of the VPN issues on Windows. It should support DNS lookup over VPN connections. It has to be enabled manually by editing an internal configuration file.

Q: What does the "WSL Integration" tab do?​

A: This makes the Kubernetes configuration accessible in the displayed WSL distributions so that you can use commands such as kubectl to communicate with Kubernetes.

Q: Where can I find detailed logs?​

A: Click on the Troubleshooting tab, then click on Show Logs.

Q: How can I enable the dashboard for the Traefik ingress controller?​

A: For security reasons, the Traefik dashboard is not exposed by default. However, it is possible to expose the dashboard in multiple ways. For instance, you can use one of the two approaches shown below.

Using port-forward to enable dashboard access​
kubectl port-forward -n kube-system $(kubectl -n kube-system get pods --selector "app.kubernetes.io/name=traefik" --output=name) 9000:9000

Visit http://127.0.0.1:9000/dashboard/ in your browser to view the Traefik dashboard.

Using HelmChartConfig to enable dashboard access​

Copy the instructions below into a file, for example, expose-traefik.yaml

apiVersion: helm.cattle.io/v1
kind: HelmChartConfig
metadata:
  name: traefik
  namespace: kube-system
spec:
  valuesContent: |-
    dashboard:
      enabled: true
    ports:
      traefik:
        expose: true # Avoid this in production deployments
    logs:
      access:
        enabled: true

Run the command

kubectl apply -f expose-traefik.yaml

Visit http://127.0.0.1:9000/dashboard/ in your browser to view the Traefik dashboard.

Q: Can I disable Traefik, and will doing so remove Traefik resources?​

A: Yes, you can disable Traefik in order to free up port 80 and 443 for alternate ingress configuration. Disabling Traefik will not delete existing resources. By default, the Enable Traefik feature is selected under Kubernetes Settings; uncheck this box to disable it.

If you want to delete Traefik resources, click on Reset Kubernetes on the Kubernetes Settings panel of the UI.

Q: Is there support for internal container port forwarding?​

A: Yes, support for this feature is available on all three platforms, Windows, Linux, and macOS, as of v1.1.0.

Q: Does file sharing work similarly to Docker Desktop? Do I have to do any additional configuration to mount volumes to VMs?​

A: Currently, the following directories are shared by default: /Users/$USER on macOS, /home/$USER on Linux, and /tmp/rancher-desktop on both. For Windows, all files are automatically shared via WSL2.

Standard Docker volumes that are not generally accessible from the host computer work out of the box.

To access other directories on Linux/macOS, you will have to perform additional configuration.

If you want to change the behavior of the mounts, that will also require additional configuration.

Q: Can containers reach back to host services via host.docker.internal?​

A: Yes. On Windows, you may need to create a firewall rule to allow communication between the host and the container. You can run below command in a privileged powershell to create the firewall rule.

New-NetFirewallRule -DisplayName "WSL" -Direction Inbound -InterfaceAlias "vEthernet (WSL)" -Action Allow

Q: I don't need the Kubernetes cluster deployed by Rancher Desktop; how do I disable it to save resources?​

A: Open Rancher Desktop settings, click the cog to open Preferences, select Kuberentes, uncheck Enable Kubernetes feature is selected under Kubernetes Settings; uncheck this box to disable it.

This will allow you to run just containerd or dockerd by without allocating resources for Kubernetes.

Q: What's happening to the Kubernetes Image Manager (kim)?​

A: As of version 1.0, Kim is no longer shipped and has been replaced by nerdctl and the Docker CLI.

Q: Running brew install rancher is failing with a It seems there is already a Binary at '/usr/local/bin/<BINARY>' error, why?​

A: If any of the Rancher Desktop supporting utilities (Helm, kubectl, nerdctl, docker) are already managed by Homebrew, then the installation fails due to how the Homebrew cask formula is defined. Installing using the Mac app will avoid this issue.

Q: I installed nerdctl through the Arch User Repository, but it doesn't work with Rancher Desktop, why?​

A: For Rancher Desktop, nerdctl must run inside the VM and not on the host. The host version distributed with Rancher Desktop is just a shell wrapper to execute the command inside the VM.

Q: The tools on the Support Utilities page (in Rancher Desktop <1.3.0) are not installed and I see an Insufficient permission to manipulate /usr/local/bin error, how do I fix it?​

A: This occurs when you do not have ownership of /usr/local/bin. A long-term solution to improve the handling of permissions is in the works. In the meantime, a temporary workaround is to change ownership of /usr/local/bin by running sudo chown $USER /usr/local/bin. When you are able to write to the directory, Rancher Desktop should be able to create the symlinks.

From versions 1.3.0 and above, we no longer create symlinks in /usr/local/bin but in ~/.rd/bin and put that directory on the PATH instead, to avoid having to deal with write permissions to /usr/local/bin and file conflicts. We strongly recommend you to upgrade to the latest version of Rancher Desktop.

Q: Is Cygwin compatible with Rancher Desktop?​

A: No, but there are plans to add compatibility.

Q: How can I add Rancher Desktop to the startup programs list on Windows?​

A: On Windows, you can add a program to startup programs list in a number of ways. For example, you can use the following steps.

  1. Press Windows+R to open the Run dialog box.
  2. Type shell:startup and then hit Enter to open the Startup folder.
  3. Copy "Rancher Desktop" shortcut from Desktop and paste in Startup folder.
  4. Restart your machine.

Q: Where does Rancher Desktop actually put the data volumes?​

A:

Windows: Open Run menu (Press Windows + R) and open the path provided below, depending on the active container runtime.

dockerd(moby): \\wsl$\rancher-desktop-data\var\lib\docker\volumes
containerd: \\wsl$\rancher-desktop-data\var\lib\nerdctl\dbb19c5e\volumes\<namespace>

macOS & Linux: Navigate to the path provided below in the (lima) VM, depending on the active container runtime. You can use rdctl shell to access these paths in the VM.

dockerd(moby): /var/lib/docker/volumes
containerd: /var/lib/nerdctl/dbb19c5e/volumes/<namespace>

Q: How can I downgrade Rancher Desktop to a non-current (older) release version​

A: We strongly recommend you use the current release version as it has the latest features and bug fixes included. However, if you want to downgrade to an earlier version, please follow the steps below.

  1. Perform Troubleshooting > Factory Reset from the current installation. Please make sure the Keep cached Kubernetes images box is not checked in the Factory Reset pop up dialog.
  2. Uninstall the current version by following uninstallation instructions for your OS.
  3. Install the older version that you need.